42
1.
Changing the Stamp Cartridge
When using the optional stamp unit (see p. 14) to stamp scanned documents, you should use the following procedure to replace the
stamp cartridge whenever the stamp mark becomes smudged or faint. Contact your sales reprentative or service representative to
purchase a new stamp cartridge.
1.
Open the feeder cover.
Operate the opening lever, and then slowly raise the cover
until it stops.
2.
Open the feeder guide, and then open the inner
cover.
The feeder guide has a green tab, while the inner cover
located under the feeder guide has a light blue tab.
3.
Use a pair of tweezers or some similar tool to remove
the old stamp cartridge.
4.
Insert a new stamp cartridge.
IMPORTANT
• When installing the stamp cartridge, make sure that the stamp
does not protrude outside the hole.
• Improperly installing the stamp cartridge can cause paper
jams.
Stamp Cartridge
Inner Cover
Feeder Guide
Summary of Contents for DR 7090C - imageFORMULA - Document Scanner
Page 48: ......
