68
OSD Menu
Signal Information
Shows the signal information. When "Select Input Signal" is "4K Input", information for the entire signal and each input
is displayed. Select a signal with the SET or
buttons according to the guide at top right corner of the menu. When
signal information has been obtained although it is not displayed on the screen, the content of the information is grayed
out.
SDI Signal
DisplayPort Signal
Item
Display Example
Item
Display Example
Channel
Input Configuration
Select Input Signal
Format
Resolution
Picture Rate, I/P/PsF*
SDI Payload ID
Video Standard
Sampling Structure
Bit Depth
Picture Rate
Scanning Method
Link Number
CH1
3G/HD-SDI 1 (3G-SDI Level A)
Automatic
Automatic
4096x2160
24.00P
89 C3 46 01
3G-SDI
4:4:4:4 GBRA
10-bit
24.00
Progressive/Progressive
(Transport/Picture)
Single/Link_1
Channel
Input Configuration
Select Input Signal
Resolution
Horizontal Frequency
Vertical Frequency
Pixel Encoding
Color Depth
Matrix
RGB Range
CH4
DisplayPort
Automatic
4096x2560
79.57 kHz
59.96 Hz
4:4:4 RGB
10-bit
sRGB
Full
* When a content is grayed out, an asterisk "*" may be displayed indicating low "Picture Rate" accuracy such as "24.00P *".
System Information
Shows the video display status and network information.
Item
Display Example
Display
DP-V3010
Serial No.
000000000000
Firmware Ver.
1.20
Usage Time*
5 h
IP Address
192.168.0.1
Subnet Mask
255.255.255.0
MAC Address
FF:FF:FF:FF:FF:FF
Display Controller
CL-01
Serial No.
00000000
Firmware Ver.
4.0.0
IP Address
192.168.0.10
Subnet Mask
255.255.255.0
MAC Address
FF:FF:FF:FF:FF:FF
* The "Usage Time" is not always "0" when you purchase the display due to factory inspection.
