54
OSD Menu
Marker Settings
This menu is used to configure various markers.
Item
Setting Options (underline indicates factory default)
Marker Preset
Customizes markers which are assigned to markers 1 to 5.
Marker 1
to
5, Off
Aspect Marker
An aspect marker displays a range in accordance with the specified aspect ratio.
Note
• In the case of SDI signal, setting is disabled when "H Delay" or "V Delay" is "On".
• Aspect marker is not displayed in the following cases:
-
When there is no signal, unsupported signal, or a channel with "Input Configuration" not set is
selected
-
When an enlarged image is displayed
-
During the execution of "Playback File" under "Screen Capture"
-
When "H Delay" or "V Delay" is "On"
-
When a "Test Pattern" is displayed
-
When "Peaking 1" or "Peaking 2" is selected
Enable
Switches the aspect marker On, Off.
On
,
Off
Mask
Switches the mask color. Mask is the blanking area outside the range of the marker.
Black
:
Half (50% gray)
:
Off
: Turns mask off.
Note
• Because the Wave Form Monitor, Vector Scope and Time Code appear under the Mask, a
part of them is hidden by the Mask.
Aspect Ratio
Sets the aspect ratio of the aspect marker.
16:9, 15:9, 14:9, 13:9, 4:3, 2.39:1, 2.35:1, 1.896:1, 1.85:1, 1.66:1, Variable
The aspect ratio can be entered as a numeric value when you select "Variable" (0.01:1 increments).
The grayed out slider becomes active and can be used to set the aspect ratio.
1.00:1
to
3.00:1
(
1.78:1
)
Line
Active when "Black" or "Half" is selected for "Mask". Switches lines on mask On, Off.
On, Off
