Canon dp-v3010, Instruction Manual

Page: 13 / 102

13 Nomenclature
Display Controller
■
Front
1
F1-F10 buttons Executes the assigned function. 26
2
RGB select button (when using CDL) Selects and adjusts RGB during CDL adjustment.
25
28
3
SHARPNESS knob (normal use) Adjusts the sharpness of the
Image. Provides the same control as the
buttons in the OSD menu.
POWER knob (when using CDL) Adjusts the gamma of the image.
4
CHROMA knob (normal use) Adjusts the color saturation of the
image. Provides the same control as the
buttons in the OSD menu.
SATURATION knob (when using CDL)
5
BRIGHTNESS knob (normal use) Adjusts the black level of the image.
OFFSET knob (when using CDL)
6
CONTRAST knob (normal use) Adjusts the white level of the image.
SLOPE knob (when using CDL)
7
CDL select switch Switches between normal and CDL mode.
8
RESET button Returns adjustments
3
to
6
to default value. When adjusting the
values using the slider in the OSD menu, press the RESET button above
SHARPNESS or CHROMA to return to the default value.
9
MENU button Opens/closes the OSD menu, or moves up one level in a menu.
28
Moves the selection frame within the OSD menu. Changes settings.
SET button Confirms an OSD menu setting or moves the selection frame up/down
1 level. When the OSD menu is closed, displays various banners. 27
28
A q
button Sets the button brightness. Rotates among "Off
→
1 (dark)
→
2 (normal)
→
3
(bright)" each time button is pressed. Even when the power indicator (
A d
)
is "Off", it will flash during firmware update, network settings reset, or
when an error is detected.
–
A a
CH1-CH4 buttons Changes channel. 27
A s
button (Power button) Turns the power of main unit On/Off. 22
A d
Power indicator Off: power off
Green On: main power supply "On" of display/Power "On" / during
calibration
Green flash: when main unit power is turned on from the display
controller, during firmware update, or network settings
reset in progress
Amber On: main power of the connected display is "off" or standby or
when not paired with the connected display.
Amber flash: when error is detected
–
1 2 3
8 A a A d A s
4 5 6 7 9 A q