Canon dp-v3010, Instruction Manual

Page: 50 / 102

50 OSD Menu
Item Setting Options (underline indicates factory default)
Color Range Sets the quantization range.
Automatic : Sets the range based on signal information automatically.
Full (0-255) : Sets to Black level: 0; White level: 1023 (10-bit)/4095 (12-bit).
Limited 1 (16-235) : Limits the black and white range.
Black level: 64 (10-bit)/256 (12-bit)
White level: 940 (10-bit)/3760 (12-bit)
Limited 2 (16-255) : Limits the black range.
Black level: 64 (10-bit)/256 (12-bit)
White level: 1023 (10-bit)/4095 (12-bit)
Note
• When "1.0" is selected for "ACES", under "Compatible Settings", it can be used except when
"ACESproxy" is selected for "Picture Mode" or "ACESproxy" is selected for "Color Gamut".
• Operations when "Automatic" is selected are described below.
-
When DisplayPort is selected, "Full (0-255)" or "Limited 1 (16-235)" is set automatically
depending on DisplayPort signal information.
-
When SDI is selected, the setting is configured according to the settings for Picture Mode,
Color Gamut, and Gamma.
Picture Mode Color Gamut Gamma Color Range to be Set
DCI-P3 – – Full (0-255)
Canon Log, User 1-7 DCI-P3, Cinema
Gamut to DCI,
DCI-P3+ to DCI –
Other than the above Other than the
above
Canon Log,
Canon Log 2 Limited 2 (16-255)
Other than the
above Limited 1 (16-235)
– –
Canon Log (HDR),
Canon Log 2 (HDR),
SMPTE ST 2084 Full (0-255)
The factory default settings for each channel is shown in the following table.
CH1 CH2 CH3 CH4 CH5 to CH30
Input Configuration 3G/HD-SDI 1 3G/HD-SDI 2 Dual Link HD-SDI DisplayPort –
Select Input Signal Automatic Automatic Automatic Automatic Automatic
Format Automatic Automatic Automatic Automatic Automatic
Internal Sync Off Off Off Off Off
Channel Name (Blank) (Blank) (Blank) (Blank) (Blank)
Picture Mode DCI-P3 DCI-P3 DCI-P3 DCI-P3 DCI-P3
Color Range Automatic Automatic Automatic Automatic Automatic
– : not set