62
OSD Menu
Item
Setting Options (underline indicates factory default)
Vector Scope
Vector Scope is displayed for SDI signals. Vector scope displays the intensity of color signals and
hue with the horizontal axis showing the color difference signal Cb and the vertical line showing Cr.
Red
Green
Yellow
Blue
Cyan
Magenta
(Cb, Cr) = (255, 255)
(Cb, Cr) = (0, 0)
Cr
Cb
Note
• "Vector Scope" is not displayed in the following cases:
-
When "Frame Hold" or "False Color" is "On",
-
When "Peaking 1" or "Peaking 2" is selected
-
During the execution of "Playback File" under "Screen Capture"
-
When a "Test Pattern" is displayed
-
When "H Delay"/"V Delay" is "On"
• When "Vector Scope" is "On", "Wave Form Monitor" is "Off".
Enable
Switches the vector scope On, Off.
On, Off
Target
Sets the target.
75%, 100%
Position
Selects the display position.
Bottom Left, Bottom Right
Test Pattern
Sets the test pattern built into the main unit.
White, Gray (20%), Black, Red, Green, Blue, Ramp, 5 Step, Color Bars, PLUGE, Off
Note
• If the power is turned off once and then back on, the test pattern will not be displayed.
• The test pattern will be erased in the following cases:
-
When calibration has been started
-
When the channel is changed using the CH button, F button assigned for Channel UP/
Channel DOWN, or "Select Channel" under "Channel Settings"
-
When changing "Input Configuration" or "Select Input Signal" under "Channel Settings"
-
When "Reset All Settings" is executed
