12
Nomenclature
■
Interface
Left side
Right side
7
A
g
8
9
A
q
A
a
A
s
A
d
A
f
A
h
A
j
7A
a
3G/HD-SDI input
terminal 1
Two input systems
corresponding to input 1.
8A
s
3G/HD-SDI
output terminal 1
Monitor output
corresponding to
7A
a
9A
d
3G/HD-SDI input
terminal 2
Two input systems
corresponding to input 2.
A
qA
f
3G/HD-SDI
output terminal 2
Monitor output
corresponding to
9A
d
A
g
LAN (10/100
BASE) terminal
Connects to display
controller.
The main unit connects
1 to 1 with the display
controller. It can also be
connected via a hub.
A
h
USB port
Used to connect an
external sensor for
calibration (
31), USB
memory, hub, or controller
for color grading (element-
Tk made by Tangent Wave
Ltd.).
A
j
DisplayPort input
terminal
One input system
available.
CAUTION
• When connecting an external sensor for calibration to the USB port, cable length must not exceed 3 m. Otherwise,
communication error may occur and correct calibration may not be possible.
• Directly connect external sensors without using a hub.
• For safety, do not connect any connector that may have excessive voltage to the terminal of the video display when
connecting peripheral devices.
Note
• Dual Link HD-SDI is used for connecting two input systems (
• Both FAT16 and FAT32 USB memory devices are supported.
• Proper operation cannot be guaranteed for all USB memories.
• It may take 10 seconds or more for the USB memory to be recognized. If a USB memory is used during recognition, the
message "Detecting USB memory." is displayed.
