Canon dp-v3010 Instruction Manual Download Page 28

Page: 28 / 102

Using the OSD Menu

Using the OSD Menu

You can access the OSD menu from the display controller.

Basic Operation

1. Press the MENU button to open the OSD menu.

2. Select an item with the

buttons and press the SET

button.

The selection frame moves to sub menu.

3. Select an item with the

buttons and press the SET

button.

The selection frame moves to setting options.

4. Select the setting with the

buttons.

The button function for selecting the setting is as follows:

Slider

List

Decreases

value

Increases

value

Scrolls up the

OSD menu

Scrolls down

the OSD menu

5. Press the SET button.

The selection frame returns to sub menu.

6. Exit menu.

To exit the menu, move the selection frame all the way to the main menu on the top screen and then press the
MENU button.

Top Screen

第 1 階層

第 2 階層

第 3 階層

Main Menu

Sub Menu

Setting Options

List

Slider

Summary of Contents for dp-v3010







































































































Search results

Summary of Contents for dp-v3010

Reviews:

Related manuals for dp-v3010

Brands by name

Popular brands

Canon dp-v3010, Instruction Manual

Search results

Summary of Contents for dp-v3010

Reviews:

Related manuals for dp-v3010

Brands by name

Popular brands