Canon DP-V2420 Instruction Manual Download Page 4

Page: 4 / 108

Introduction

Introduction

Thank you for purchasing the Video Display DP-V2420.
The On Screen Display (thereafter referred to OSD) default language setting is English. To change the OSD menu
language setting, please refer to p. 69.

About this manual

Some of the illustration used in the manual have been simplified for clarity.

Conventions used in this manual

: Indicates a reference page.
Note: Indicates a note.
Reference: Indicates reference information.
CAUTION: Indicates an item you must observe.

Trademarks

• HDMI, HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI

Licensing LLC in the U.S. and other countries.

• VESA is a registered trademark or trademark of Video Electronics Standards Association in the U.S. and other

countries.

• Other product and company names herein are trademarks or registered trademarks of their respective owners.

Supplied Accessories

The following items are supplied with this product. Please check before using.

AC Power Cord HT-21

AC Power Cord clamp

HC-01

DP-V2420 Instruction Manual

(this document)

Summary of Contents for DP-V2420













































































































Search results

Summary of Contents for DP-V2420

Reviews:

Related manuals for DP-V2420

Brands by name

Popular brands

Canon DP-V2420, Instruction Manual

Search results

Summary of Contents for DP-V2420

Reviews:

Related manuals for DP-V2420

Brands by name

Popular brands