31
Operating the Video Display
Inputting Characters
This section describes how to input the characters. Use this function to specify a channel name, a display name, or
filename.
1. Press the MENU button to open the OSD menu.
2. The character input screen appears automatically when
character input is required.
Move the selection frame to the location to enter characters
using the
jog dial ( ).
3. Select characters using the jog dial (
or rotation).
The following characters can be selected: Press
buttons to display them one by one. You can input up to 16
characters.
Alphanumeric characters: A to Z, a to z, 0 to 9
Symbols: , . : ; ‘ ` - + / = % & ! ? # _ | $ ^ ~ @ { } [ ] < > ( ) space
Some characters cannot be used for a filename. In this case, they are automatically skipped.
4. Repeat steps 2 and 3 until the desired text has been inputted.
5. Press the jog dial when you are finished.
The selection frame moves to "OK".
6. Check the content and press the jog dial to confirm the settings.
Reference
• When selecting "Cancel" or pressing MENU button before selecting "OK", the settings will be reset and the previous screen
will be displayed.
• To erase the character in the selection frame, press the RESET button of the video display.
Using the Function (F) Buttons
You can assign functions to the F buttons on the video display to execute them instantly.
1. Press the MENU button to open the OSD menu.
2. Select "System Settings"
→
"Function/Channel Button"
→
"Display Function" or "Display Function (CDL)"
and press the jog dial to determine the selection.
A new window opens and displays button names F1 to F8.
3. Select the name of the button using the jog dial and press the jog dial to determine the selection.
The selection frame moves to next OSD menu level.
4. Select the function to assign using the jog dial.
See "Display Function" or "Display Function (CDL)" (
69, 72) for the available functions.
5. Press the jog dial to determine the selection.
The setting is confirmed.
Reference
• Select "Function Settings"
→
"Various Function" and set "Function Guide" to "On". Then, you can check the list of functions
assigned to F buttons on the video display by pressing the jog dial while OSD is not displayed (
