Canon DP-V2420 Instruction Manual Download Page 65

Page: 65 / 108

OSD Menu

Item

Setting Options (underline indicates factory default)

Audio Level Meter

Configures various settings for the audio level meter. Displays the audio level of the selected channel
number.

Note

• "Audio Level Meter" cannot be displayed when "Frame Hold" is "On", during the execution of

"Playback File" under "Screen Capture", or when "Test Pattern" is displayed.

Enable

Switches the audio level meter On, Off.

On,

Off

Channel
Number (SDI)

Sets the number of channels displayed when SDI signal is input. Options change according to the
setting for "SDI Group" under "Audio Settings".
When "CH1-CH8" is selected for "SDI Group":

2CH (CH1-CH2), 4CH (CH1-CH4),

6CH (CH1-CH6), 8CH (CH1-CH8)

When "CH9-CH16" is selected for "SDI Group":

2CH (CH9-CH10), 4CH (CH9-CH12),

6CH (CH9-CH14), 8CH (CH9-CH16)

Channel
Number
(HDMI)

Sets the number of channels displayed when HDMI signal is input.

2CH (CH1-CH2), 4CH (CH1-CH4), 6CH (CH1-CH6), 8CH (CH1-CH8)

Peak Hold

When set to "On", one second of audio signal at the peak is kept.

On, Off

Standard Level Sets the standard level.

-40

0 (-20)

Test Pattern

Sets the test pattern built into the main unit.

White, Gray (20%), Black, Red, Green, Blue, Ramp, 5 Step, Color Bars, PLUGE, Off

Note

• If the power is turned off once and then back on, the test pattern will not be displayed.
• The test pattern will be erased in the following cases:

- When calibration has been started
- When the channel is changed using the CH button, F button assigned for Channel UP/

Channel DOWN, or "Select Channel" under "Channel Settings"

- When changing "Input Configuration" or "Select Input Signal" under "Channel Settings"
- When "Reset All Settings" is executed

Summary of Contents for DP-V2420













































































































Search results

Summary of Contents for DP-V2420

Reviews:

Related manuals for DP-V2420

Brands by name

Popular brands

Canon DP-V2420, Instruction Manual

Search results

Summary of Contents for DP-V2420

Reviews:

Related manuals for DP-V2420

Brands by name

Popular brands