Canon DP-V2420, Instruction Manual

Page: 51 / 108

51 OSD Menu
Item Setting Options
Picture Function Target In the "Multi View (Dual)" display, sets the screen for enabling image quality setting functions in the
function settings.
Function Settings where displays change due to this function: "Peaking", "False Color",
"Various Function (Monochrome, Blue Only, Red Off, Green Off, Blue Off)"
Left and Right : Entire screen
Left : Left screen only
Right : Right screen only
Separator In the "Multi View (Quad)" or "Multi View (Dual)" display, displays the border lines of the screen.
On, Off
The factory default settings for each channel is shown in the following table.
CH CH1 CH2 CH3 CH4 to CH30
Input Configuration 3G/HD-SDI HDMI 3G-SDI RAW –
Select Input Signal Automatic Automatic Automatic Automatic
Image Division Automatic Automatic Automatic Automatic
Format Automatic Automatic Automatic Automatic
Internal Sync Off Off Off Off
Channel Name (Blank) (Blank) (Blank) (Blank)
Picture Mode ITU-R BT.709 ITU-R BT.709 Canon Log ITU-R BT.709
Picture Mode R ITU-R BT.709 ITU-R BT.709 Canon Log ITU-R BT.709
Audio Input Input A Input A Input A Input A
Marker/TC/WFM/VEC Input Input A Input A Input A Input A
Picture Function Target Left and Right Left and Right Left and Right Left and Right
Separator Off Off Off Off
– : not set