Canon DP-V2420 Instruction Manual Download Page 15

Page: 15 / 108

Installation/Connection

Installation/Connection

How to Carry the Main Unit

When lifting the video display, please use the carrying handles on the display’s sides.

CAUTION

• When unpacking, carrying, installing, or connecting the main unit, please note that at least two people are required.
• When carrying the video display, handle it carefully not to touch or damage the screen.

Procedures to attach the protection panel

You can attach the protection panel to protect the screen when carrying the video display or when using it outdoors.

1. Unscrew the four screws on the front face.

Use a 1.5 mm hexagonal key.
Do not lose the removed screws. Do not use these screws for other purposes.

2. Place the protection panel by aligning its corners with the screw holes. (

77).

Take care when attaching the panel in order to avoid damaging it.

4×M3
7 mm deep (Max.)

CAUTION

• Avoid touching the screen during this step as it may damage it.

Summary of Contents for DP-V2420













































































































Search results

Summary of Contents for DP-V2420

Reviews:

Related manuals for DP-V2420

Brands by name

Popular brands

Canon DP-V2420, Instruction Manual

Search results

Summary of Contents for DP-V2420

Reviews:

Related manuals for DP-V2420

Brands by name

Popular brands