Canon DP-V2420 Instruction Manual Download Page 99 | Manualshive

Page: 99 / 108

background image

99

Software Used in This Product

Software Used in This Product

Software installed with this product includes software modules from Canon or third parties.

Software Developed by Canon and Free Software

Software developed or created by Canon and accompanying document is protected by copyright law, terms of an
international convention and any other governing laws.
This product uses software modules under copyright by third parties and distributed as free software. Some of these
software modules are subject to the GNU General Public License v2 (GPL), GNU Lesser General Public License v2.1
(LGPL) or any other license.

Acquiring Source Code for Free Software

Some free software requires the acquirement of the source code of modules in order to distribute the executable form
of those software modules. For information on how to acquire the source code for free software such as these and
confirming terms of the GPL, LGPL and other license agreements, please check with the distributor from whom the
product was purchased.

The following free software modules are installed to this product:
• linux kernel

• busybox

• glibc

• JFFS2

• SquashFS

• FUSE

• libfuse

• libupnp

• avahi-autoipd

• libxml

• zlib

• libpng

License Agreement for this Product

Obligation to Present License Agreement

The copyright holders of software modules installed with this product require its license agreement to be displayed.
This license agreement is as follows:

■

libupnp License

Copyright (c) 2000-2003 Intel Corporation All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the
following conditions are met:

* Redistributions of source code must retain the above copyright notice, this list of conditions and the following

disclaimer.

* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following

disclaimer in the documentation and/or other materials provided with the distribution.

* Neither name of Intel Corporation nor the names of its contributors may be used to endorse or promote products

derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

«
...
97
98
99
100
101
...
»

Summary of Contents for DP-V2420













































































































Reviews:

No comments

Related manuals for DP-V2420

Brand: Acer Pages: 28

Brand: Acer Pages: 28

Brand: Acer Pages: 29

Brand: Acer Pages: 27

Brand: Acer Pages: 5

Brand: Acer Pages: 27

Brand: Acer Pages: 39

TravelMate 220 series

Brand: Acer Pages: 2

Brand: Acer Pages: 19

Brand: NEC Pages: 14

10.4" TFT LCD Ceiling Monitor

Brand: Farenheit Pages: 11

Brand: Mitsubishi Pages: 76

Brand: NewCommWorld Pages: 19

Brand: Aaeon Pages: 47

SUPREME CONNECT 2

Brand: Luvion Pages: 102

Brand: C.ITOH Pages: 196

Brand: Alecto Pages: 24

kontron FlatView Series

Brand: S&T Pages: 65

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands