Canon CR-1 Mark II Operation Manual Download Page 33

Page: 33 / 138

4. Performing studies

-25-

Continued on the following page >>

4.5 Ending a study and transferring images

4.5.1 Ending a study

End the study.

Click

[Study Complete]

. The Study Complete screen is displayed.

To end the study, click

[OK]

To select the storage, follow the steps described below.

Study Complete screen

When [Study Cancel] is selected

When

[Study Cancel]

is clicked, the Study Cancel screen is displayed.

[OK]

is then clicked, the study is ended without saving the images which have been taken.

Study Cancel screen

Study Complete and Study Cancel

The same operation can be performed by selecting

[Study] > [Study Complete F12]

[Study]

> [Study Cancel]

from the menu bar.

When a study is started without opening the Study Input screen

When a study is started without opening the Study Input screen, click

[Study Complete]

display the Study Input screen. Refer to

4.2 Inputting the study (see page 10)

, and input the

study information.

Summary of Contents for CR-1 Mark II











































































































































Search results

Summary of Contents for CR-1 Mark II

Reviews:

Related manuals for CR-1 Mark II

Brands by name

Popular brands

Canon CR-1 Mark II, Operation Manual

Search results

Summary of Contents for CR-1 Mark II

Reviews:

Related manuals for CR-1 Mark II

Brands by name

Popular brands