Canon 1827B001 Reference Manual Download Page 238

Page: 238 / 381

Back

Next

Previous

TOP

9-4

Before Using the
Machine

Document and Paper

Copying

Sending and
Receiving

Printing and
Scanning

Network

Remote UI

System Manager
Settings

Maintenance

Troubleshooting

Appendix

Index

Table of Contents

Use a clean, soft, dry, lint-free cloth to remove

any toner or paper debris from the machine’s
interior.

Do not touch the fixing assembly (A) as it becomes very hot
during use.
Do not touch the transfer roller (B) as this can damage the
machine.

If loose toner comes into contact with your skin or clothing, wash
with cold water. Warm water will set the toner.

–

Hold the toner cartridge by its handle.

The arrow (A) on the toner cartridge should be facing away from you
and pointing down.

Insert the cartridge so that the protrusion on

the right side of the toner cartridge (A) fits into
the guide (B) located on the right side of the
machine and slide it down parallel to the guide.

Summary of Contents for 1827B001






























































































































































































































































































































































































Search results

Summary of Contents for 1827B001

Reviews:

Related manuals for 1827B001

Brands by name

Popular brands

Canon 1827B001, Reference Manual

Search results

Summary of Contents for 1827B001

Reviews:

Related manuals for 1827B001

Brands by name

Popular brands