1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-42
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
9.
Press
[
] or [
] to select <ON> or <OFF>,
then press [OK].
<OFF>: Does not print a RX report.
<ON>: Prints a RX report.
<RX REPORT> should also be set to <ON> so that RX reports are
automatically printed when documents are received in memory. For
instructions, see “RX REPORT,” on p. 11-48.
10.
Press [
] or [
] to select <MEMORY RX
TIME>, then press [OK].
If you do not need to set the timer for memory lock, skip to
step 16.
11.
Press [
] or [
] to select <ON>, then press
[OK].
12.
Press [
] or [
] to select <MEM RX START
TIME>, then press [OK].
13.
Use the numeric keys to enter the start time (in
24-hour format), then press [OK].
M E M R X S T A R T T I M E
0 0 : 0 0
Ex.
14.
Press [
] or [
] to select <MEM. RX END
TIME>, then press [OK].
15.
Use the numeric keys to enter the end time, then
press [OK].
16.
Press [Stop/Reset] to return to the standby
mode.
Printing All Documents Stored in Memory
1.
Perform step 1 to 3 in “Memory Lock Reception,”
on p. 4-41.
