49
Printed : 1/9/02
49
4.
Examine the receivers (slots) on the bottom of
the seat pan. Make sure they are in good
condition. If damage is found, replace the seat
with a new one.
SEAT INSTALLATION
1.
To install the seat, align the retaining tabs on
the fuel tank with the receivers on the
underside of the seat.
2.
Slide the seat into place.
3.
Hold up on the release lever and push the rear
of the seat down and release the lever. You
should hear the lever “snap” or “click” onto the
latch on the subframe.
4.
Test to confirm that the seat is latched properly
by lifting the rear of the seat up with your
fingers.
5.
Test similarly at the front of the seat.
POTENTIAL HAZARD
Unlatched, or damaged seat
WHAT CAN HAPPEN
If you install the seat incorrectly (not latched) or if
the seat is damaged, it can shift or come off while
you are riding causing you to lose control. You
could be seriously injured or killed in an accident.
HOW TO AVOID THE HAZARD
Make sure the seat is fastened securely and it is in
good condition. After installing the seat, pull the
front and rear of the seat upwards to make sure it is
latched and locked into position.
If the seat is loose or unlatched, correct the situation
before riding.
Contact your Cannondale Dealer for a replacement
seat if damaged.
