© 2002 Cannondale Corporation - All Rights Reserved
32
Motorcycle Fluids.fm
16. Remove the inlet fitting and inlet filter (screen)
from the crankcase hole.
Protect your eyes. Wear safety glasses when
working with compressed air.
17. Clean the filter using compressed air. Inspect
the inlet fitting, O-ring, and inlet screen for
tears, cracks, and other damage. Replace any
damaged part with a new one.
18. Reinstall the filter and fitting. Be sure to inspect
the fitting O-ring and replace it with a new one if
necessary. Apply some clean engine oil to the
O-ring before installing the fitting.
TO R Q U E :
E ngine, engine oil inlet fitting
18.0 lbf•ft (25.0 N •m )
19. Reinstall the engine oil inlet hose and clamp
onto the fitting. Be sure to re-position the heat
shield up to the clamp.
20. Add the specified engine oil at the filler hole.
1. Inlet filter (screen)
(1)
1. Screen
2. O-ring
3. Inlet fitting
4. Clamp
5. Spar return hose
6. Heat shield
(1)
(2)
(3)
(4)
(5)
(6)
