© 2001 Cannondale Corporation - All Rights Reserved
22
Motorcycle Parts and Controls.fm
H A N D GU A R D S
The handguards are located on the right and left
sides of the handlebar directly in front of the handle
grips.
These guards are designed to only offer limited
hand protection. Make sure you read the warning
following a description of the guards.
Make sure the handguards are in good condition
and fastened securely before riding. The handguards
should not interfere with operation of the vehicle
controls. Tighten the mounting harware securely.
This photo shows the kickstand in the operating
position. See a close-up of the area indicated in the
next photo.
The image on the left shows a kickstand that is in
the correct operating position. Notice that there is no
gap (1) present between the kickstand leg and the
plate.
The image on the right shows a kickstand in the up
position but “hanging.” Notice that gap between the
leg and the plate. The kickstand may be damaged
(e.g., bad spring, bent leg or plate). This condition
must be corrected before riding the vehicle.
YES
YES
NO
NO
1. Type 1 handguard (left side)
2. Type 1 handguard (right side)
1. Type 2 handguard (left side)
2. Type 2 handguard (right side)
1
2
1
2
