© 2002 Cannondale Corporation - All Rights Reserved
30
Motorcycle Fluids.fm
7.
Remove the engine oil crankcase drain bolt
and sealing washer and allow the oil to drain
into your oil pan.
8.
Apply some anti-seize compound to the
threads of the drain bolt. Install the sealing
washer onto the bolt so that the flat side faces
the crankcase and install the bolt and washer
into the crankcase. Tighten the bolt to the
specified torque.
TO R Q U E :
E ngine oil crankcase drain bolt
6.0 lbf•ft (8.1 N •m )
9.
Position your oil pan under the engine oil filter
cover and remove the bolt and the filter cover.
NOTE :
Be sure to note the two O-rings in the cover when
you remove it.
If the installed filter is the screen type, remove the
seal, oil filter (screen) and oil seal from the filter
housing.
1. Bolt
2. Sealing washer
3. Crankcase drain hole
a. Sealing washer (flat side)
1. Bolt
2. Cover
(3)
(a)
(1)
(2)
1
2
1. Bolt
2. Cover
3. O-ring
4. O-ring
5. Filter seal
6. Filter (screen)
1. Screen type filter (with seals)
2. Paper type filter (glued seals)
(1)
(2)
(3)
(4)
(6)
(5)
(5)
1
2
