41
Printed : 1/9/02
41
PRE-RIDE INSPECTION
Perform a pre-ride inspection of your motorcycle
before every ride.
POTENTIAL HAZARD
Failure to inspect the vehicle before operating.
WHAT CAN HAPPEN
Increases the possibility of equipment failure
resulting in an accident.
HOW TO AVOID THE HAZARD
Always inspect this vehicle before you operate it.
Always follow the inspection and maintenance
procedures found in this Owner’s Manual.
Have your vehicle serviced by an authorized
Cannondale Motorsports Dealer every 25 hours of
operation.
P R E - R I D E C H E C K L I S T
ITEM
CHECK
Apparel
Condition of (helmet, eye protection, boots, gloves, long-sleeved shirt and
long pants).
Brakes
Check proper operation, fluid levels, front lever and rear pedal freeplay, leaks.
Fill with DOT4 brake fluid if necessary. Check front and rear pads and discs.
Chassis (frame)
Inspect the frame, subframe, and swingarm for bending, cracks, or other
damage. Don’t ride if damage is found.
Clutch
Check for proper operation.
Coolant
Check coolant level. Fill with coolant if necessary.
Drive
Clean and lubricate the drive chain. Check drive chain slack and condition,
sprockets, swingarm buffer, rollers, and guide block.
Engine
Check oil level. Fill with engine oil if necessary
Fuel
Fill with fuel. Check for leaks or damage to the fuel system.
Throttle
Check the throttle freeplay, makes it operates properly in all handlebar
positions. Closes completely when released.
Transmission
Check oil level. Fill with transmission oil if necessary
Wheels/Tires
Wheels (for damage), tire pressures (all four) and condition. Replace if
damaged. Add air if required.
Suspension
Check the fork and rear shock compression and rebound damping settings.
Check the fasteners for tightness and re-torque if necessary. Inspect for
damage and excessive wear.
Steering
Make sure that the handlebars turn freely; no binding of the cables/hoses
throughout the full steering range (stop to stop).
Handguards
Make sure the handguards are mounted securely and that they do not
interfere with the vehicle controls. Fasten the mounting harware securely.
Panels, Bolts/Fasteners
Make sure all panels are fastened securely, check fasteners for tightness.
Lights (if applicable)
Check for proper operation of the headlight and taillight
