© 2002 Cannondale Corporation - All Rights Reserved
36
Motorcycle Fluids.fm
NOTE :
The sealing washer is reusable however a damaged
washer may result in a leak.
CAUTION
Insert the filter into the bolt before installing.
This method helps assure that the other end
of the filter will locate into the back of the
transmission oil pump (rear of cartridge plate
inside gearbox cavity). If you try to insert the
filter into the hole first and the filter does not
locate into the cartridge plate hole, unfiltered
oil can enter the system damaging the pump.
8.
Tighten the bolt to the specified torque.
TO R Q U E :
Transm ission, oil, drain bolt
6.0 lbf•ft (8.1 N •m )
9.
Add the specified transmission oil at the filler
cap until oil level reaches the bottom of the
check bolt hole (or middle of the inspection
window on equipped models). Pour slowly and
allow time for the oil to flow throughout the case
cavity.
10. Run the engine briefly (1-2 minutes) to circulate
newly added oil and recheck the level. Add if
necessary.
1. Drain bolt
2. Sealing washer
3. Filter (screen)
a. Sealing washer flat side
2
1
3
a
