13
Printed : 1/9/02
13
PARTS & CONTROLS
This section describes the parts and control
functions found on your vehicle. Not all the items
found in this section may be installed on your vehicle.
If you have any questions about the parts, control
functions, or components installed on your vehicle,
consult your Cannondale Motorsports Dealer.
E N G I N E S T A R T B U T T ON
The engine start button is located on the right
handlebar and is (GREEN) in color.
Before attempting to start the engine, press it for 1
second to activate the engine management system
circuits. Then, press and hold it to activate the starter
motor. But, be sure to read the Operation section of
this manual for a detailed explanation of the best
starting procedure.
NOTE :
When pressing the button to operate the starter,
motor hold it for no more than 2-3 seconds at a time.
E N G I N E S T O P B U T T ON
The engine stop button is located on the left
handlebar. The button is (RED) in color.
Pressing it will shut off a running engine. Or, press
it to deactivate the engine management system
circuits.
Make sure this button operates properly before
starting out.
To test it, start the engine then press and hold the
button. When pressed the engine should stop
running.
NOTE :
The stop button is normally a closed circuit switch. If
the stop switch is damaged or the wires are frayed
or torn, (circuit open) the engine may not start.
1. Engine start button
(1)
1
1. Engine stop button
(1)
1
