Defining the Detectors
To set up detector definitions to use the software, use the following guidelines:
1.
To use the 2016 Setup software, you must have at least one AIM detector
input definition loaded into the VDM’s runtime database (two AIM detector
input definitions are required if more than sixteen 2016 modules are being
configured). The first AIM will be used to communicate with 2016 modules
1-16; the second AIM is used for modules 17-32.
2.
To create the detector input definitions, use the MCA Input Definition Editor
to define the required AIM input definitions (refer to the Genie-PC Basic
Operation Manual or the Genie-2000 Operations Manual for details on how
to use the MCA Input Definition Editor).
3.
Note that the first AIM input definition must be named DET01; if a second
AIM input definition is required, it must be named DET02.
50
PC Software Installation
