4
INTRODUCTION
SYSTEM CONFIGURATION
STANDARD FEATURES
MTS systems have been designed and engineered to offer
considerable performance advantages compared to traditional
products in the Commercial & Light Industrial market today.
HIGH EFFICIENCY & HIGH QUALITY
PRODUCT WATER
MTS systems are optimized to use the minimum salt and regeneration
water necessary to regenerate the system. This reduces water and salt
wasted per regeneration up to 50%.
When used in softener systems during periods of low flow rates, the
controller will keep only a single tank in service eliminating the
potential for “channeling”. Tanks are brought on or off line according
to flow rate demand so that the system is always operating at peak
efficiency.
OPTIONS
POLISHING RECYCLE RINSE -
For softener systems an option for
Polishing Recycle Rinse is available. Prior to a tank coming on line
product water is recycled through the tank to polish the water and
insure no hardness is passed to the service line. If the flow rate drops
below the point where channeling can occur, the system will also
recycle product water to maintain high quality.
BATTERY BACK UP -
A battery back up system allows the controller to
continue metering and tracking water usage for up to 9 hours so that
all capacity used during the outage is accounted for.
REMOTE START -
An external remote button can easily be added so
that the system can be manually started from a control room or other
location.
ADVANCED DIAGNOSTICS -
The system has advanced diagnostics to
help troubleshoot any problems that may be encountered.
REMOTE MONITORING (NOT AVAILABLE AT THIS TIME) -
The MTS
system can easily connect to a PC directly or wirelessly (3G network) to
the internet and to your PC. All system information and settings can be
viewed and monitored.
MTS95 Softener System Configuration
Tank Size
(Diameter)
Injector Set
Brine Line Flow
Control (BLFC)
Drain Line Flow
Control (DLFC)
14”
#4S Black
0.9 GPM
#4S (5.0 GPM)
16”
#5S Orange/Black Noz
#7S (7.0 GPM)
18”
#1 Gray
1.35 GPM
#1 (8.0 GPM)
21”
#3 Red
#2 (11.0 GPM)
24”
#4White
#4 (17.0 GPM)
Suggested Filter Valve Configuration
Tank Size
(Diameter)
Drain Line Flow
Control (DLFC)
14”
#3 (14.0 GPM)
16”
#4 (17.0 GPM)
18”
#5 (21.0 GPM)
21”
#6 (24.0 GPM)
24”
None (35.0 GPM)
