8
9
System
Settings
System
Size
Salt
Efficiency
Regeneration
Cycle Times
Advanced
Settings
Feed
Water
System
Size
System Size
Total Units 6
Resin Per Unit
10.00
CF
Resin Flow Rate
0.5
GPM
Salt
Efficiency
Salt Efficiency
High Efficiency
Standard Efficiency
High Capacity
PROGRAMMING
(CONTINUED)
For standard MTS system the default Valve Type is BNT 950. When changing from different modes, a page will displayed that will confirm you
want to change the System Type. Select Yes to change the type and No to keep the current settings. A System Setting page will be displayed. These
options are covered in the Advanced Programming section and are only needed when you are replacing a valve / controller in the system at a later
time. Press the MENU button to exit the System Setting page and return to the Main Menu.
If you are changing a Main PCB or Slave PCB it may be necessary to format them. Format Slave Valve, Restore History Data, and Restore Settings are
covered in the Advanced Programming Section.
Press the UP / DOWN button to highlight the desired menu icon. Press the SET button to enter the System Size menu. In the System Size menu you
can edit the number of units, amount of softener resin per unit, and the refill flow rate (DLFC).
Press the UP / DOWN button to highlight the desired menu icon. Press the SET button to enter the Salt Efficiency menu In the System Size menu
you can choose High Efficiency (6lbs per CF), Standard Efficiency (10lbs per CF), or High Capacity salt settings (15lbs/CF). The system capacity is
automatically calculated based on the System Size and Salt Efficiency.
SYSTEM TYPE - (SOFTENER)
Press the UP / DOWN button to highlight the System Settings menu icon. Press the SET button to enter the menu.
