26
Connector
Injector
Body
assembly
2x Screws
Injector Body
Cover assembly
2x O- Rings
2x O- Rings
Screen
Screen
Air Disperser
Injector
Nozzle
Injector
Throat
REPLACING OR CLEANING INJECTORS
To replace the Injectors:
Shut off the water supply to your softener and reduce the pressure by opening a cold soft water faucet.
Remove the Connector
Remove the 2x Screws
Slightly pull the Injector Body and Injector Cover assembly outward
Slightly pull out the Screen
Replace the Injector Nozzle
Slightly pull out the Air Disperser
Replace the Injector Throat
Reassemble using the reverse procedure
Sediment, salt and silt will restrict or clog the injector. A clean water supply and pure salt will prevent this from happening. The injector assembly is
located on the left side of the control valve (viewing valve from rear). This assembly is easy to clean.
NOTE: Carefully flush all parts including the screen. Use a mild acid such as vinegar or Pro-Rust Out to clean the small holes in the
orifice and throat.
