16
Regeneration
Cycle Times
Regen. Cycle
Backwash
10
Min
Rinse
10
Min
Advanced
Settings
Auxillary
Outputs
Peak Period
Block Out
Chemical
Pump
Peak Period
Block Out
Start 1 End 1
Start 2 End 2
Peak Period Block Out
MON.
06:00 09:00 17:00 19:00
TUES.
06:00 09:00 17:00 19:00
WED.
06:00 09:00 17:00 19:00
THURS.
06:00 09:00 17:00 19:00
FRI.
06:00 09:00 17:00 19:00
SAT.
06:00 09:00 17:00 19:00
SUN.
06:00 09:00 17:00 19:00
PROGRAMMING
(CONTINUED)
Press the UP / DOWN button to highlight the desired menu icon. Press the SET button to enter the Regen. Cycle menu. In the Regen. Cycle menu you
can set the system Backwash and Rinse times. The times apply to all the tanks in the system.
Press the UP / DOWN button to highlight the desired menu icon. Press the SET button to enter the Advanced Settings menu.
Press the UP / DOWN button to highlight the desired menu icon. Press the SET button to enter the Peak Period Block Out settings. These settings
allow the user to block out two periods per day where a regeneration will not be allowed. At the end of a Peak Period, and units scheduled
for regeneration will start.
Press the UP / DOWN button to highlight the desired menu icon. Press the SET button to enter the Auxiliary Outputs or Chemical Pump menu. For
detailed programming instructions please see the Advanced Programming section.
NOTE:
SET THE TIMES SO
THAT THEY ARE
ALL EQUAL VALUE
IF NO BLOCK OUT
PERIODS ARE DESIRED.
