MP-‐360 Tripod Head Hardware
•
Install BaYeries:
Open the baRery compartment by sliding the cover downward and lifing it
outward, insert the 4 AA baReries in the same posiMon as the markings inside the baRery
compartment.
•
Moun)ng the Motorized Pan Head:
The motorized Pan Head may be fastened to any tripod
or to any mounMng device having a standard UNC ¼-‐20 thread mounMng screw.
•
Moun)ng the Camera:
Fasten the camera securely to the top of the motorized tripod using
the mounMng screw, which is a standard UNC ¼-‐20 thread. Align the opMcal axis of the
Camera with the long dimension of the Motorized Pan Head body.
• Specifica)ons:
• Power source: 4 AA baReries or A/C adapter plug (neither included)
• VerMcal Tilt Angle: +/-‐ 15 degrees
• Horizontal Panning Angle: 360 degrees with unlimited rotaMon (If purchased through
CamRanger)
• Maximum Camera weight: 6 lb (2.7 kg)
• Size (L x H x W): 5.75 x 4.5 x 4 inches (145 x 115 x 103 mm)
• Weight (without baReries: 1.75 lb (800 mg)
• Bubble Level: If desired, place the included adhesive bubble level on the top of the tripod (on
end with on/off switch).
CamRanger, CamRanger PT Hub, and Tripod Setup
• Required parts:
• CamRanger*
• CamRanger PT Hub
• Motorized tripod (either the MP-‐360, Bescor, or Hague)*
• USB cable (included with CamRanger or camera)
• Serial Connector (included with the CamRanger PT Hub)
• USB 2.0 A to B connector (included with CamRanger PT Hub)
• Camera*
• Device* (iPhone, iPad, Android device, Mac, or Windows computer)
*Requires charged baRery or connecMon to AC power
22
© CamRanger – Patent Pending
