CamRanger CamRanger Tripod User Manual Download Page 21

Page: 21 / 25

dictates the pracMcal maximum.

If the CamRanger is only connected to the CamRanger network, the CamRanger Share app users

will also need to connect to the CamRanger network, using the same password, however no

registraMon is required. If the CamRanger is bridged to an exisMng Internet network, the Share

app user can connect to the same Internet network that the CamRanger is connected to, and

sMll use the Share app. Those using the share app should consult the CamRanger Controller

about the network connecMon and should stay within range of the CamRanger or bridged

network when using the app

For more informaMon about the CamRanger Share ApplicaMon, refer to the

CamRanger Share

App User Guide Video

(Note: this video is demonstraMng the setup with an iPad, but the general

concept and use with the Mac is the same).

CamRanger PT Hub and Tripod

• To use the CamRanger PT Hub and Motorized tripod, a

CamRanger is required.

• The CamRanger PT Hub and MP-‐360 (MP 101, Bescor, or Hague)

will only work with CamRanger ﬁrmware 6 and up and the latest

Mac sofware. Refer to

www.CamRanger.com/downloads

for the

CamRanger ﬁrmware update and latest Mac applicaMon.

The

CamRanger must be registered (see CamRanger user

manual) while the CamRanger PT Hub does not require

registraMon.

CamRanger PT Hub Hardware

• The CamRanger powers the CamRanger PT Hub.

Serial Connector port

(Cable included with

CamRanger PT Hub)

USB 2.0 A-‐end port

(USB

2.0 A to B connector

included with CamRanger

Hub)

USB port

(USB cable

included with the

CamRanger or Camera)

Summary of Contents for CamRanger Tripod


























Search results

Summary of Contents for CamRanger Tripod

Reviews:

Brands by name

Popular brands

CamRanger CamRanger Tripod, User Manual

Search results

Summary of Contents for CamRanger Tripod

Reviews:

Brands by name

Popular brands