Campden instruments 7000smz, Instruction Manual

Page: 28 / 39

28
7 Options
7.1 Light Source CL200
(optional)
The 7000smz Instrument may be (optionally) supplied with an LED cold light source.
The light source should be fixed to either the top of the covers of the instrument or (if
you have the optional magnifier) to the mounting bracket for the magnifier. If the light
source is fitted directly to the instrument cover, place the neoprene cushioning pad
between the cover and the light source body before fitting and tightening the fixing
screws. Do not over-tighten the screws. This is illustrated below.
The light source can be switched on and the light intensity controlled via a combined
press button on the body of the light source where the flexible arms are mounted.
A brief press will switch the unit on or off whilst a sustained press will cause the unit
to cycle through the light intensities available
– release the button when you have the
preferred intensity. The unit will
‘remember’ the chosen intensity for the next use.
The output beams may be focussed by rotating the lens ferrule at the end of each
flexible arm.
The power supply is supplied with a number of adapters and should be fitted with the
appropriate adapter to suit the available power outlet.
On/Off and
intensity
control
Beam focus
control