Campden instruments 7000smz, Instruction Manual

Page: 15 / 39

15
Press the
‘HEIGHT’ key.
Press the
‘LOAD BATH’ key to quickly
raise the table. Press again to stop.
Press the
‘ADVANCE’ key to quickly
lower the table. Press again to stop.
Set a movement amount using the
rotary knob. Press the
‘RETURN’ key
to raise the table by this amount.
Press the
‘SLICE’ key to lower the
table by this amount.
Press the
‘AUTO REPEAT’ key to
reset the height datum.
Press the
‘HEIGHT’ key once more to
exit.
Bringing the specimen to the start
position
Cutting a slice
Press the
‘ADVANCE’ key and using
the rotary knob to control the advance
speed. Press the
‘SLICE key to switch
the movement on or off.
Bring the cutting blade into a suitable
position for commencement of cut.
When the blade is in a suitable
position, press the
‘ADVANCE’ key
again to exit.
(This selects the start position such
that when the
‘RETURN’ key is
pressed [see next page] this is the
position the blade will return to).