14
6.4
Manual Operation
When the instrument is first switched on, scroll to the desired user name and press
MENU. All cutting parameters associated with that user will be recalled.
If desired, make any changes as described in Section 6.2 and scroll to the
‘EXIT
MENU
’ line and press the ‘MENU’ key. If necessary load a bath to the table and
press the
‘LOAD BATH’ key. The table will raise the bath to a nominal position and
the operating screen will change to that shown in the following illustration:
Note that the
‘SLICE ON/OFF’ key is
now
illuminated
green
and
the
advance speed as shown on the
display is 0.00 mm/s.
Bringing the Blade to the Start
height
Summary of Contents for 7000smz
Page 26: ...26 Correct any problems and press SLICE to retry...
Page 35: ...35...
