CRVW3 3-Channel Vibrating-Wire Datalogger
82
First, add a root device to the network map by pressing the
Add Root
button.
When using a serial cable (local) connection to the base station, you should
select
ComPort
for the type of root device. If you have a telemetry connection
between
LoggerNet
and the base station, you will usually choose
IPPort
as the
root device. From the next list that is presented, choose
PakBusPort (PakBus
Loggers)
.
You will be presented with a list of dataloggers. Choose
CRVWSeries
, and
press
Close.
Assuming you started with an empty network map, you should now see
something like this on the left side of the screen (
Entire Network
):
The
ComPort
or
IPPort
root device is the object used to establish a link with
your base station.
Click on the
ComPort
device in the network map (
Entire Network
) pane, and
note the
Hardware
tab in the right hand pane. Use the drop-down selection
box called
ComPort Connection
to choose the serial port to which the base
Summary of Contents for CRVW3
