Campbell CRVW3, Instruction Manual

Page: 30 / 135

CRVW3 3-Channel Vibrating-Wire Datalogger
17
Start DevConfig , and then scroll down and highlight the CRVW Series device
and you will see a screen like this:
Install the USB driver by clicking on the link entitled “install the USB driver
onto your computer”.
8.1.1.3 Network Planner
If you have installed the LoggerNet software, you can use the Network Planner
tool to make network design decisions and configure devices before they are
deployed to the field. The Network Planner is found in the Tools section of the
LoggerNet
toolbar.
The
Network Planner
allows you to plan out which measurement stations,
repeater stations, and base station will be used in your deployed system. You
can place hardware device icons onto a canvas (with an optional background
graphic in place, such as map), and explore how connections are made between
each station. Many of the settings are automatically set by the software as each
device is added to the canvas (such as unique PakBus addresses). Details about
the computer running LoggerNet are also worked out. After a design is
complete, the Network Planner can be used to automatically configure each