Campbell CRVW3, Instruction Manual

Page: 76 / 135

CRVW3 3-Channel Vibrating-Wire Datalogger
63
FIGURE 10-3. Sensor Side and LoggerNet Side of a CRVW3 Network
The plan for your network should include an itemized list of:
• Sensors to be measured (Section 10.2.1 , Sensor Planning
(p. 64)
)
•
The CRVW3 devices required to measure all the sensors (Section
10.2.2 ,
Planning for CRVW3 End-node Stations
(p. 65)
)
• The CRVW3 devices that will be used as repeater stations (Section
10.2.3 , Repeater Planning
(p. 66)
)
•
The dedicated repeater stations that are needed (Section 10.2.3 ,
Repeater Planning
(p. 66)
)
• The location of the LoggerNet computer station (Section 10.2.4 ,
LoggerNet Station Planning
(p. 66)
)
•
The location of the base station (Section 10.2.5 ,
Planning the Base
Station
(p. 67)
)
•
Aggregating dataloggers, if needed (see Appendix C , Aggregating
Dataloggers
(p. C-1)
)
Since the planning of a radio network involves geographic decision making, it
is recommended that maps be created which indicate the geographic location of
each of these items.