Campbell CR6 Series, Operator'S Manual

Page: 625 / 690

Appendix A. Info Tables and Settings
625
Beacon() Numeric
• Settings Editor: Com Ports Settings | Beacon Interval
Governs the interval at which the CR6 broadcasts PakBus messages on the selected COM
port to discover new neighboring nodes, and it governs the default verification interval if
the value of the Verify
(p. 640)
setting for the selected port is 0 .
BuffDepth Numeric Y
• Status table field: ≈35
Shows the current
pipeline mode
(p. 211)
processing buffer depth, which indicates how far the
processing task is currently behind the measurement task. Updated at the conclusion of scan
processing, prior to waiting for the next scan.
BusLoad Numeric Y
•
CPIInfo
table
Number of devices on CPI bus. Updates once per second when
CPI is active.
Info Tables and Settings: C
Keyword Data Type
R
ead
O
nl
y
• Where to Find
Description
CalGain()
2 Numeric Y
•
Status table field: ≈47
Array of floating-point values reporting calibration gain (mV) for each analog input voltage
range. Updated by auto self-calibration.
CalOffSet()
2
Numeric Y
• Status table field: ≈50
Array of three integers reporting offsets (mV) for analog input voltage range ±5000 mV,
±1000 mV, ±200 mV. Updated by auto self-calibration.
CalVolts()
2
Numeric Y
•
Status table field: ≈47
Array of three floating-point values reporting a factory calibrated correction factor for
analog input voltage range ±5000 mV, ±1000 mV, ±200 mV. Updated by auto
(background) calibration. Updates at start up calibration.
CardBytesFree Numeric Y
• Keyboard: Settings (Datalogger)
Number of bytes free on the removable memory card. -1 means no card.
CardStatus String Y
•
Station Status field: Card Status
•
Status table field: ≈30
Contains a string with the most recent status information for the removable memory card.
Central
Routers()
Numeric
•
Settings Editor: Advanced | Central Routers
Array of eight PakBus addresses for routers that can act as central routers.
ChargeInput Numeric Y
•
Status table field: ≈15
Voltage on the CHG terminals. Updates when auto self-calibration executes (once per
minute).