Campbell Hausfeld GN0800, Operating Instructions Manual

Page: 4 / 20

4
Operating Instructions
compression cycle, and the intake
and exhaust valves are closed. (The
piston pushes a small amount of air
from the spark plug hole on
compression).
6. To clean air filter –
Remove filter
from generator.
Wash in a solvent.
Pour motor oil
(SAE #20)
on filter,
squeeze
out excess
and reinstall in
generator.
Maintenance
(Continued)
Spark Plug Remove carbon
Adjust gap
●
Replace if necessary
Air Filter Clean
Replace if necessary
●
Fuel Filter Clean
Replace if necessary
●
Decarbonization Remove carbon deposits
Check and adjust at
●
your dealer
Item Action Every 50 hours Every 150 hours
or every month or every 3 months
MAINTENANCE SCHEDULE
R
R
AC receptacle
AC protector
Output light
24 µ F/300VAC
Stator assembly
Rotor assembly
Oil annunciator
Oil sensor
Oil pilot light
OFF/ON
Engine stop switch
T.C.I. unit
10A (6.5A)
1
2
3
4
Br
G
G
B
G/Y
Y
B/W
B/W
220V 220V
G/Y
7. To clean fuel filter – Stop
engine. Turn fuel switch
to closed (horizontal)
position. Remove fuel
filter and
disassemble.
Wash filter in a
solvent. Dry with a
clean cloth. Reinstall
in generator.
Wiring diagram for GN0950
Wiring diagram for GN0800
G/Y
G/Y
R
AC receptacle
Engine stop switch
Ignition coil
24 µ F/250VAC (10µF/300VAC)
B
0
0
AC circuit breaker
3A (2A)
Stator assembly
Rotor assembly
Magneto
C.D.I unit
Spark plug
OFF/ON
B
B
Br
G/Y
Br
0
W/R
Capacitor
B = Black
R = Red
G = Green
Br = Brown
O = Orange
G/Y = Green/Yellow
B/W= Black/White
B = Black
R = Red
G = Green
Br = Brown
G/Y = Green/Yellow
B/W= Black/White