PTP 450 Configuration and User Guide
Task 4: Configuring General and Unit settings
3-28
pmp-0815 (August 2015)
Attribute
Meaning
If
Disabled
is checked, then an override/default plug functions as
an override plug. When the module is rebooted with the plug
inserted, it can be accessed at the IP address 169.254.1.1 and no
password, and all previously configured parameter values remain
and are displayed. A subscriber, technician, or other person who
gains physical access to the module and uses an override/default
plug
can see and learn the settings. When the module is later
rebooted with no plug inserted, the module uses the new values
for any parameters that were changed and the previous values for
any that were not.
LED Panel Mode
Legacy Mode
configures the radio to operate with standard LED
on page
Undo Unit-Wide
Saved Changes
When you click this button, any changes that you made in any tab
but did not commit by a reboot of the module are undone.
Set to Factory
Defaults
When you click this button,
all configurable parameters on all tabs
are reset to the factory settings.
This can be reverted by selecting "Undo Unit-Wide Saved
Changes",
before rebooting the radio.
When
Set to Factory Defaults Upon Default Plug Detection
is set to “
Enable
”, the radio does not select all of the
frequencies for Radio Frequency Scan Selection List. It needs to
be selected manually.
Configuration File
This allows to download the configuration file of the radio. This
configuration file contains the complete configuration including
all the default values. The configuration file is highlighted as
downloadable link and the naming convention is “<mac address of
radio >.cfg”.
Apply
Configuration File
This allows to import and apply configuration to the BHS.
Chose File
: Select the file to upload the configuration. The
configuration file is named as “<mac address of radio>.cfg” or
“canopy.cfg”.
Upload
: Import the configuration to the radio.
Apply Configuration File
: Apply the imported file configuration
to the radio.
