PTP 450 Configuration and User Guide
Task 8: Configuring syslog
3-76
pmp-0815 (August 2015)
Attribute
Meaning
Syslog Minimum
Level Source
This control determines whether the BHS attempts to use the
minimum syslog level defined by the BHM, or whether it uses a
local defined value using the “Syslog Minimum Level”
parameter.
When set to “BHM preferred, use local when BHM
configuration unavailable”, and if the BHS can register with a
BHM, then it uses the Syslog Minimum Level defined on that
BHM. If the BHS cannot register then it uses its own Syslog
Minimum Level setting.
When set to “Local only” the BHS will always use its own
Syslog Minimum Level setting and ignores the BHM’s setting.
Syslog Minimum
Level
This provides a selection for the minimum syslog message
severity that is sent to the syslog server. Values range from fatal
(highest severity and least verbose) to info (lowest severity,
maximum verbosity).
For example: If the Syslog Minimum Level is set to notice, then
only messages with severity notice and above are sent.
