Viewing General Status tab (BHM)
PTP 450 Configuration and User
pmp-0815 (August 2015)
2-3
The BHM’s
General Status
tab provides the following read-only fields.
Table 10
BHM General Status attributes
Attribute
Meaning
Device Type
This field indicates the type of the module. Values include the
frequency band of the BHM, its module type and its MAC
address.
Board Type
This field indicates the series of hardware.
Software Version This field indicates the system release, the time and date of the
release. If you request technical support, provide the
information from this field.
Board MSN
This field indicates the Manufacture’s Serial number. A unique
serial number assigned to each radio at the factory for
inventory and quality control.
FPGA Version
This field indicates the version of the field-programmable gate
array (FPGA) on the module. When you request technical
support, provide the information from this field.
Uptime
This field indicates how long the module has operated since
power was applied.
System Time
This field provides the current time. Any BHS that registers to
a BHM inherits the system time, which is displayed in this field
as GMT (Greenwich Mean Time).
Ethernet
Interface
This field indicates the speed and duplex state of Ethernet
interface to the BHM.
Regional Code
A parameter that offers multiple fixed selections, each of which
automatically implements frequency band range restrictions
for the selected region. Units shipped to regions other than the
United States must be configured with the corresponding
Country Code to comply with local regulatory requirements.
Regulatory
This field indicates whether the configured Country Code and
radio frequency are compliant with respect to their
compatibility. PTP 450 equipment shipped to the United States
is locked to a Country Code setting of “United States”. Units
shipped to regions other than the United States must be
configured with the corresponding Country Code to comply
with local regulatory requirements.
DFS
This field indicates that DFS operation is enabled based on the
configured region code, if applicable.
Antenna Type
The current antenna type that has been selected.
Channel
Frequency
This field lists the current operating frequency of the radio.
