PTP 450 Configuration and User Guide
Task 7: Setting up SNMP agent
3-66
pmp-0815 (August 2015)
Attribute
Meaning
SNMPv3 Read/Write
User
Read-write user by default is disabled. The default values for
the Read/Write users is :
Username = Canopy
Authentication Password = authCanopy
Privacy Password = privacyCanopy
The minimum length of password for SNMPv3 Auth and
Privacy is 8 digits.
SNMPv3 Trap
Configuration
When enabling transmission of SNMPv3 traps the read-only
or read-write user credentials must be used and selected
properly in order for the SNMP manager to correctly
interpret the traps. By default transmission of SNMPv3
traps is disabled and all traps sent from the radios are in
SNMPv2c format.
Accessing IP /
Subnet Mask
1 to 10
Specify the addresses that are allowed to send SNMP
requests to this BHM. The NMS has an address that is
among these addresses (this subnet). You must enter both
The network IP address in the form xxx.xxx.xxx.xxx
The CIDR (Classless Interdomain Routing) prefix length
in the form /xx
For example:
16 in 198.32.0.0/16 specifies a subnet mask of
255.255.0.0 (the first 16 bits in the address range are
identical among all members of the subnet).
192.168.102.0 specifies that any device whose IP
address is in the range 192.168.102.0 to
192.168.102.254 can send SNMP requests to the BHM,
presuming that the device supplies the correct
Community String
value.
The default treatment is to allow all networks access. For
more information on CIDR, execute an Internet search on
“Classless Interdomain Routing.” You are allowed to specify
as many as 10 different accessing IP address, subnet mask
combinations.
SNMP Trap Server
DNS Usage
The management DNS domain name may be toggled such
that the name of the trap server only needs to be specified
and the DNS domain name is automatically appended to that
name. The default SNMP trap server addresses for all 10
available servers is 0.0.0.0 with the appending of the DNS
domain name disabled.
