Task 7: Setting up SNMP agent
PTP 450 Configuration and User
pmp-0815 (August 2015)
3-69
In the
SNMP
tab of the BHS, you may set the following parameters.
Table 31
BHS SNMP attributes
Attribute
Meaning
SNMP Community
String 1
Specify a control string that can allow a Network Management
Station (NMS) to access SNMP information. No spaces are
allowed in this string. The default string is
Canopy
.
The reboot of radio is not required after modifying SNMP
Community String 1 to take effect.
SNMP Community
String 1 Permissions
You can designate the
SNMP Community String 1
to be the
password for WM, for example, to have read/write access to
the module via SNMP, or for all SNMP access to the module to
be read only.
SNMP Community
String 2 (Read Only)
Specify an additional control string that can allow an Network
Management Station (NMS) to read SNMP information. No
spaces are allowed in this string. The default string is
Canopyro
. This password will never authenticate a user or an
NMS to read/write access.
The
Community String
value is clear text and is readable by
a packet monitor. Additional security derives from the
configuration of the
Accessing Subnet
,
Trap Address
, and
Permission
parameters.
The reboot of radio is not required after modifying SNMP
Community String 1 to take effect.
Engine ID
The Engine ID may be between 5 and 32 hex characters. The
hex character input is driven by RFC 3411 recommendations
on the Engine ID. The default Engine ID is the MAC address of
the device
