PTP 450 Configuration and User Guide
Compliance with radio regulations
6-32
pmp-0815 (August 2015)
FCC compliance testing
With GPS synchronization installed, the system has been tested for compliance to US
(FCC) specifications. It has been shown to comply with the limits for emitted spurious
radiation for a Class B digital device, pursuant to Part 15 of the FCC Rules in the USA.
These limits have been designed to provide reasonable protection against harmful
interference. However the equipment can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to other radio communications. There is no guarantee that interference will not occur in
a particular installation.
A Class B Digital Device is a device that is marketed for use in a residential
environment, notwithstanding use in commercial, business and industrial
environments.
Notwithstanding that Cambium has designed (and qualified) the PTP 450 products to
generally meet the Class B requirement to minimize the potential for interference, the
PTP 450 product range is not marketed for use in a residential environment.
FCC and ICC IDs and certification numbers
The US FCC IDs, Industry Canada Certification numbers and covered configurations are shown
below:
Table 70
US FCC IDs, Industry Canada Certification Numbers and Covered Configurations
FCC
ID
Industry
Canada
Cert
Number
Module
Families
Frequencies
Antenna
(OFDM)
Maximum
Combined
Tx Output
Power
Z8H89FT
0004
109W-
0004
PTP 450
BHM 2.4-
GHz
20 MHz channels, centered
on 2417.5 – 2460 in 2.5 MHz
increments (within the 2400
– 2483.5 MHz ISM band)
17 dBi
Connectorized
19 dBm
10 MHz channels, centered
on 2405 – 2470 in 2.5 MHz
increments (within the 2400
– 2483.5 MHz ISM band)
5 MHz channels, centered
on 2402.5 – 2475 in 2.5 MHz
increments (within the 2400
– 2483.5 MHz ISM band)
