1
PRODUCT OVERVIEW
The Vanguard 3000™ Series from CalAmp — simple, reliable wireless connectivity without limitations – GSM and CDMA
connectivity in a single device.
Uniquely designed for operation on both GSM and CDMA networks, Vanguard 3000 offers more choice and
redundancy in carrier networks. This single, flexible platform addresses a variety of wireless communications needs
with serial to IP conversion, over-the-air configuration and system monitoring for optimal connectivity. This ready to
deploy broadband router enables wireless data connectivity for up to two LAN and one serial device over public cellular
networks at 3G speeds.
Equipped for a broad range of fixed applications, Vanguard 3000 provides reliable connectivity for Programmable Logic
Controllers (PLCs), Remote Terminal Units (RTUs), Ethernet web cameras or any other Ethernet or serial device. For
mobile applications, this intelligent broadband router incorporates an optional highly sensitive 16-channel GPS receiver
and an intelligent algorithm that offers outstanding receive sensitivity and improved accuracy, integrity and availability
of GPS signals – even when the vehicle is off. An optional, built-in WiFi access point also allows your tethered devices to
remain connected even when you leave the vehicle.
This widely deployed wireless solution delivers countless software capabilities. OEMs may tailor the Vanguard 3000 by
loading their application on the Open Developer Platform (ODP) which allows a Linux application to run on a partition
of the embedded Linux operating system.
1.1
MODULE IDENTIFICATION
The module identification label can be found on the bottom of your Vanguard 3000 device. This label contains the
product part number, the serial number, FCC and IC IDs as well as carrier-specific information that will be required
when activating your data account.
Figure 1 Fixed model identification label
Figure 2 Mobile model identification label
Vanguard 3000 Series Multicarrier Cellular Data Modem & IP Router PN 001-7300-100 Rev. B
| Page 1
