Step 4
In the IPsec Support section of the tab, click
Enable
. Set NAT Mode to
Bypass
if it is not already selected. Click
Save
.
Figure 57 Enable IPsec, set NAT mode to Bypass, and Save
Step 5
In the Tunnel Configuration section of the same tab, enter IPsec tunnel configuration information for the first
tunnel, as shown in the following figure. When you have finished entering information for all the fields, click
Add/Update
to save the tunnel configuration.
Figure 58 Security — IPsec tab Tunnel Configuration settings completed for first example
Vanguard 3000 Series Multicarrier Cellular Data Modem & IP Router PN 001-7300-100 Rev. B
| Page 93
