140
Removing the centre rack
Park your CS on the bipod kickstand, make sure it is stable and switch off
the drive system of your CS.
First loosen the five Torx screws and remove the screws together with
the washers of the centre rack positioned in a line along the down tube
(2 screws vertically (Fig. 149), 3 screws horizontally (Fig. 150)). Put the
screws and the washers aside.
Fig. 150
Fig. 149
Remove the adapter holder positioned under the battery subsequently.
To do this, undo the two lower, adjacent bolts on the adapter holder first
(Fig. 151). Be sure to keep hold of the respective nut. Put these bolts and
nuts also aside (Fig. 152).
Fig. 152
Fig. 151
