background image

136     

Accessories

In purchasing this CS you laid the foundation for many years and miles of 
enjoyable cycling. Whatever you are planning to do with your bike, be sure 
to have proper equipment and to keep a few tips in mind. Your Ca Go deal-
er has a variety of useful accessories on offer enhancing both your safety 
and convenience.

You can equip your CS with various accessories. However, make sure that 
the requirements of the road vehicles regulations in your country, of the 
BS EN standard 15194, the DIN 79010 and of the guidelines for the parts 
replacement are observed. Any retrofitted part must be compatible with 
your CS. Ask your Ca Go dealer for advice.

 Warning

Improper accessories may change the characteristics of your CS and even 
cause an accident. Therefore, always contact your Ca Go dealer before 
mounting any accessories and strictly observe the notes on the intended use 
of the CS and the notes in the “Guidelines for the parts replacement on CE 
marked e-bikes / EPACs / EAPCs with 250 watts and a pedal assist of up to 
25 kmh (15.5 mph)” in the chapter 

“Guidelines“

.

  Safety instructions

Retrofitted accessories, such as mudguards, pannier racks etc. can impair 
the functioning of your CS. Always ask your Ca Go dealer before mounting 
accessories of any kind to your CS.

  Safety instructions

Before buying any additional bells, horns or lighting accessories, inform 
yourself thoroughly whether they are permitted and tested and accordingly 
approved for use on public roads. Make sure additional battery/accumula-
tor-powered lamps are marked with the wavy line and the letter “K”.

Summary of Contents for CS100












































































































































































Reviews: