108
Notice
If there is play between bearing shaft and cranks, they can sustain damage.
Risk of breakage!
Notice
It is therefore crucial when switching gears to continue pedalling smoothly
and without too much force. Do not shift under load, as this will shorten the
durability of the chain considerably. Furthermore, this can lead to a chain-
suck, i.e. the chain can get jammed between chainstay and chainrings.
Safety instructions
Read in any case the possibly enclosed operating instructions of the gear
manufacturer and make yourself familiar with the operation in an area free
of traffic before you set off for the first time. You find more information at
www.microshift.com
Checking and readjusting
The derailleur gears of your CS were adjusted by your Ca Go dealer before
delivery. However, Bowden cables may stretch a little on the first kilo-
metres/miles, making gear shifting imprecise and the chain rattle.
Adjusting is a job for an experienced mechanic. If you want to try it by
yourself, also observe the operating instructions of the gear manufacturer
made available on the website of the manufacturer. If you have problems
with your gear system, contact your Ca Go dealer.
Warning
For your own safety, bring your newly purchased CS to your Ca Go dealer
for its first inspection after 100 to 300 kilometres (60 to 180 miles), 5 to
15 hours of use or four to six weeks, at the very latest, however, after three
months.
